Cantek | MRS340 Multi Ripsaw

by Cantek
SKU WSI-CantekMRS340

Our MRS-340 multi-ripsaw is designed for fast change over between various working widths. Simply use a block of wood or a spacer between the fixed and moving blade and turn the knob to expand the shaft and your blade is locking in position and ready to go. This is much faster than interchanging spacers on a shaft or sleeve.

  • New Hydraulic Quick Lock Arbor for infinite quick positioning of saw blades on arbor. Shaft has hardened inserts which expand and contact the internal bore of the blades. This provides accurate and secure blade holding with the tightening of a knob on the end of the shaft.
  • Can be used with quick change arbor or saw sleeve with spacers.
  • The main frame is cast iron, all the main parts are enclosed, ensuring protection and perfect stability.
  • Straight line feeding caterpillar chain type
  • Infinitely Variable feed speeds
  • Nickel chrome steel saw arbor
  • Digitally controlled lubricator for chain
  • Centralized lubrication system
  • 2 rows of anti-kickback fingers
Maximum work Thickness 4.33” (110mm) using 14” saw blade(s)
without short stock attachment 3.34” (85mm) using 12” saw blade(s)
Maximum Cutting Width 13.4″ (340mm)
Will pass through the opening O.S. Saw to 25.6” (650mm) outside Inside Saw
Will pass through the full Enclosure Opening to 26” (660mm)
Minimum length – Standard 22″ (550mm)
Min. Len. Short Stock Feeding device (optional) min. length 15.8” (400mm)
Saw arbor sleeve diameter 70 mm – double keyed
Saw Sleeve Usable Length 13.4”
Motor HP 50 HP – Other larger sizes Optional
Saw arbor speed 3800 RPM
Feed Speeds  – Standard – 15 – 135 FPM (5-40mpm) – Adjustable to 165 FPM (5-50mpm) if desired
Feed motor HP 3 HP
Power lift to hold-down rollers .5 HP
Saw blade size 12” -14” (300 – 350mm)
Table size 60” x 23.4”
Table height from floor 35.5”
Net weight 4,650 lbs.
Powered by Top Rated Local®