High quality edge banding results for cabinet parts and case goods.

The Cantek MX350 Automatic Edgebander is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more.  The counter rotating pre-milling cutters ensure optimum panel edge quality and squareness which result in a less visible glue joint.  It comes equipped with high frequency motors on both the end trim and top & bottom trim.  In addition it is equipped with PVC radius scraping and buffing units.  User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm. It’s compact design and affordable price point make it the ideal edge banding solution for the small cabinet shop who requires pre-milling.

  • Versatile edgebander capable of applying 0.4mm to 3mm edge tape.
  • Quick change glue pot allows you to change glue colours in minutes.
  • Couter rotating diamond premilling cutters produce optimum panel edge for superior edgebanding results
  • High frequency end trim & flush trim motors produce fine edge finishing results
  • Multi-function trimmers allows for flush or radius trimming on edge banding
  • Radius scraping removes any knife marks on radius edges
  • Buffing unit polishes the edge
  • Powerful chain feed system ensure work piece stability during application and processing of edge banding resulting in a high quality finish
  • Teflon coated Quick Change glue pot can be removed and exchanged in only minutes. Comes with (1) quick change pot and others can be acquired for running different color glues.
  • Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material can be hand-fed
  • Conveyor chain feed system for reliable results
  • Heated infeed fence for pre-heating the panel for optimum glue penetration
  • PLC control system with LED display and keypad
  • Workpiece is fed by chain
  • Edge coil support plate: Ø 800mm (31 ½”), for PVC/ABS
  • Spring-loaded pressure unit with (2) pressure rollers
  • Heavy-duty pressure beam with extendable workpiece support
    High-frequency pre-milling units can remove up to 3mm and is designed to provide an ideal edge for applying edge tape by cleaning up poorly cut panels
    (2) counter-rotating diamond cutterheads for optimum results and longevity
    High frequency 12000 RPM end trimming unit, with Ø100mm (4”) TC-Saw blades
    High frequency 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
    Radius scraper with 2mm radius
    3000 RPM top & bottom buffing units to polish the machined edge
Feeding speed
29 FPM
9 meters/min.
Panel thickness
8~45 mm
Max. pre-milling thickness
Edge thickness
0.4 ~ 3 mm
Min. panel width
100 mm
Min. panel length
170 mm
Working table height
850 mm
Dust collection outlet
Ø 5” x 3
Ø 127 mm x 3
Total connected power
10 HP
7.5 kW
Machine dimensions (LxWxH)
147” x 52” x 54”
3700 x 1310 x 1380mm
Machine weight
1452 lbs
660 kgs
Shipping dimensions (LxWxH)
91” x 29” x 54”
2290 x 720 x 1370mm
Shipping weight
1558 lbs
708 kgs
Electrical requirement
230/3/60: 40 amp
Feeding motor
1 HP
0.75 (kW)
Pre-milling motors (2)
1 ½ HP x 2
1.1 kW x 2
Glue spindle motor
¼ HP
0.18 (kW)
Front/rear trimming motor
0.3 HP
0.22 (kW)
Upper trimming motor
½ HP
0.37 (kW)
Lower trimming motor
½ HP
0.37 (kW)
Upper buffing motor
0.16 HP
0.12 (kW)
Lower buffing motor
0.16 HP
0.12 (kW)
½ HP
0.4 (kW)
Glue pot
1 ¾ HP
1.315 (kW)
Powered by Top Rated Local®