Festool 201064 Vac-Sys Vacuum Pump
Designed for use with Clamping Modules, this continuous-duty pump is quiet, efficient, and features a front-panel pressure gauge for easy monitoring.
This VAC PMP is the pump for the VAC SYS System.
The new vacuum clamping system VAC SYS makes the seemingly impossible become possible: clamping without limits and no marks left behind.
The vacuum clamping system VAC SYS enables you to machine the workpieces from all sides in a single step. No time-consuming readjustment. Work on the main surface, along the edge or along curves that require 360° rotation of the workpiece and a swivelling range of 90°. The system redefines the concept of freedom and creates the perfect conditions for ergonomic processes.
A firm yet gentle hold on the workpiece surface: the specially molded cups use the vacuum to clamp the workpiece safely and reliably. The soft, flexible high-quality gaskets are particularly gentle and do not scratch or damage even high gloss polished surfaces.
Do you have a bigger challenge? You can combine two clamping units at the same time for larger, heavier workpieces: simply attach the second clamping unit to first clamping unit, the vacuum pump and the foot valve. Four different vacuum pads can be used individually for different workpiece sizes and shapes. You can connect the VAC SYS to the new Multifunction Table MFT 3 using an adapter plate and fold the VAC SYS down when not in use.
Makes changing routing, sawing, planing, sanding, drilling and screwdriving tools easier.
- Vacuum pump
|Pump Capacity||2.06 CFM (3.5 m3/h)|
|Power Consumption||120 wtts / 1 amp, 120 V C|
|Noise (Sound Level)||55 dBA|
|Motor Speed||3,300 RPM|
|Pump Speed||3,600 RPM|
|Ambient Temperture Range||41° F - 104° F|
|Weight||20.4 lbs (0.25 kg)|