K 360 HP/ERT - Single Sided Edgebander
Automatic single sided edgebander designed to be used for edgebanding straight vertical profiles with coiled material
(veneer and PVC) and with strips (high-pressure laminate and solid wood) with a maximum thickness of 8mm.
End cutting unit: cut and "radius" in a single operation.
Automatic and error free cutting of thick edges due to the particular system with two blades that allows the straight cutting of solid wood edges and the chamfering of the thin edges.
Rounding unit: edge angles finishing on straight and shaped panels.
Rounding of front and rear edge angle on straight, chamfered and post-formed panels. The operation is automatically carried out by the unit and grants an optimal finishing, without necessity of further machining.
Touch 7 Control: just a "touch" to use the machine.
Error free machining with the touch-screen display with its customised graphics that allows an intuitive and easy selection of the main machine functions.
Perfect results on all surfaces. The controlled axes allow all intermediate positioning of the trimming and edge scraping groups, ensuring optimal edge banding even in the case of surfaces with different degrees of roughness or panels covered with protective film. These units allow the machining of 2 different radii, endless thin edges and solid wood (comp. K 360 HP T-ER1).
|Edge thickness||mm||0,4 - 6|
|Panel thickness||mm||8 - 60|