SOLD - Used 2017 SCM Olimpic K600 ERT

Capacities And Speed

• Edgebanding thickness: .4mm - 8mm (.016-5/16”)
• Guillotine capacity: 3mm
• Feed speed: 36/52 ft/min.
• Panel height: 3/8” min – 2 3/8” max
• Minimum panel length: 5 1/2”
• Minimum panel width: 2”
• Minimum distance between panels: 24”

Startouch Controller
The K 600 comes equipped with the new "Startouch" controller. This controller features a 12" touch screen display. Capable of storing 100 programs, 6 at the touch of a single key. Color graphic display of all the working units. Tracks production information, diagnostic information and monitors maintenance schedules. Choose mm's or inches, as well as 5 different languages. Swivels 270 degrees and tilts for easy access.



“RT-E” Pre-Milling Station:
To rectify/clean panels already sized and squared before the edge is applied. The unit is composed of two high frequency motors with jumping action controlled through the PLC. The cutting heads are adjustable vertically. The unit is equipped with copying devices which guarantee that material removal is consistent on long or slightly out-of-square panels.

K-SEL 2” END TRIMMING STATION
This unit is composed of two independent .50 hp motors mounted on THK guides. Dust extraction comes standard on the unit. End trim utilizes a draw cut system for reduced blade projection on thick panels. The unit comes standard with automatic tilting of the unit from the control panel with two preset positions.

Edge Trimming Station:
The top and bottom trim station has two independent 1.0 hp motors operating at 12,000 rpm. Large diameter top and bottom copy wheels and side copy shoes, all with precise digital indicators. The unit comes standard with pneumatic positioning. This allows the operator, through the controller, to position the work unit without the operator having to make any manual adjustments.
The infeed fence has a mechanical digital indicator to position the fence and determine the amount of stock removal. It is also equipped with pneumatic positioning through the controller when the premill unit is selected through the program.
Anti-Adhesive
The machine comes equipped with an anti-adhesive unit positioned prior to the pre milling unit. It prevents the buildup of glue on the top and bottom of the panel. The unit comes with two independent nozzles and a tank of anti-adhesive liquid.

“ROUND-K” Corner Rounding Unit:
Two independent .80hp motors that slide on THK guides ensuring the highest quality finish. Unit is designed to work as an additional set of trimmers for rounding the top/bottom as well as the front/rear corners of work piece with 3mm PVC edges. The unit is equipped with front and lateral copying devices and pneumatic blowers to clean the panel. Dust shrouds surround the cutter and travel with the unit as it trims. The unit can go from thin tape to 3mm PVC, through the controller, with no manual adjustments by the operator.

“RAS / K Profile Scraping Station
The profile scraping station designed to remove knife marks from thick PVC. The unit is equipped with pneumatic in/out positioning through the controller. It has a large diameter horizontal copy wheel and side copy wheel device with digital indicators. It features a quick knife replacement system and comes with 3mm knives. The unit is also equipped with a collection bin for thick radius pvc edges, this prevents potential issues with an existing dust system.

Buffing Unit
The buffing unit has two .25 hp motors. The unit cleans and polishes the panel edge. The unit is capable of tilting and angled buffing to maximize its effectiveness without wearing a groove in the buffing wheel and rounding over the panel edge.