Timesavers Model 252-30, 1 Orbital, Brush Sander
Three Top Heads
- One 30 HP D/A Sanding Head
- One 7.5 HP, TEFC, Twin Pad
- One 3 HP, TEfc, Brush
- One 1 HP, TEFC, Oscillation
The Three had configuration of the Model 252-30/B consists of three top head, one widebelt dual action sanding head and one twin pad orbital sanding head followed by one brush head.
Dual Action Platen
The first head is a dual action polishing platen and incorporates a combination contact roll and cam-adjustable polishing platen within the same sanding head. Either the contact roll or polishing platen can be used alone, or they can be used simultaneously to provide heavy cutting and fine finishing capability in a single sanding head.
Twin Pad Orbital Sanding Head
The twin pad orbital sanding head consists of two 5" wide platens within a single head. This new technology improves finish, increases abrasive life, and results in higher feed speed rates. Dust collection is mounted between the platens and at the outfeed side for improved evacuation of dust. Two seperate platens allow the use of various abrasive grits to improve cutting capabilities.
Brush Head
A 12" Diameter grit impregnated brush is provided. The brush is jack-adjustable for wear
Infeed and Outfeed Holdwon Rolls
The machine is equipped with rubber covered hold down rolls on the infeed and outfeed side of the sanding and brush heads. These rolls allow the proper tension to feed stock against the maximum horsepower of the machine.