SCM Minimax ME 40 Edgebander, INCLUDES FREIGHT

by Minimax
$37,665.00
SKU WSI-SCMME40ET-3PH

The Minimax ME 40ET is a 3-phase automatic edge bander with great flexibility for both thin and thick edges, intended to bridge the gap between a traditional small to midsize edge bander for woodworkers. One of the key features is the pre-mill. There is no competition in the U.S. market for such a small, versatile machine, with pre-mill that is so economical! This machine is meant to be used with melamine edges, PVC and ABS up to 3mm and wooden strips up to 5mm. SCM Group has the right machine for every application. This amazing machine boasts capacities usually only found on much larger units. This edge bander includes high frequency motors, a dual cutter head pre-milling unit, precise trimming units, and three finishing systems all in a relatively small footprint that is affordably priced.

AVAILABLE MODELS

ME 40ET: 3-phase edge bander with automatic strip magazine, rapid glue pot substitution and internal lightning. Comes with the following (3mm radius tools) units: Dual pre-mill, End trim with RADIUS feature, Top/bottom trim, Profile scrape, Glue scrape, Buffing.

ME 40ETR: 3-phase edge bander with automatic strip magazine, rapid glue pot substitution and internal lighting. Comes with the following (3mm radius tools) units: Dual pre-mill, Combined end trim corner rounding, Top/bottom trim, Profile scrape, Glue scrape, Buffing.

**$3,200.00 Installation Required, Freight Included**

PLC CONTROL SYSTEM
The control system for the Minimax ME 40 is a simple and intuitive use of the error-free machining and is ensured by the control positioned on the front of the edge bander which allows an easy selection of all of the main functions. These functions include the operating unit switching on/off and the PLC unit which guides the operator during maintenance, cleaning, diagnostic operations and much more.

TRACK FEED SYSTEM
The Minimax ME 40 track feed movement system is designed for a perfect finish that eliminates transfer marks onto the work piece. 9 meter/min panel feed speed with track movement for increased productivity. Monitoring of the panel position is done by an encoder for total work cycle control.

DIGITAL MECHANICAL READOUTS
Each station on the edge bander is easily adjustable and repeatable through the use of these digital mechanical readouts. Easily input the dimensions you are processing, and fine tune them simply. By taking note of the positions for the different panels you run, you can easily change the settings on the fly for any change in operation.

HIGH FREQUENCY MOTORS
Thanks to the high frequency motors of the end cutting unit and of the in-line trimming unit, the reliability of the Minimax ME 40 is unmatched. The maximum in precision, an optimal finishing level to an applied edge is always attained. With the absence of belts or other conventional driving systems, we have engineered less vibration into the unit, increasing reliability and high precision over the life of the machine.

DUAL DIAMOND CUTTERHEAD PRE-MILLING UNIT
The Minimax ME 40 Pre-mill unit utilizes two 80mm diameter diamond tools with opposing rotation and timed intervention that, through the removal operation corrects any panel imperfections caused by the saw cutting process and panel storage. This allows for a clean edge and a good lineal finish during the pre-mill process. Pre-milling comes with an independent exhaust and air blower for cleaning of the panel during the process. You can carry out vertical adjustments of the tools for use even into the final sharpening phase. Allowing four levels of removal (0.5, 1, 1.5, and 2mm)

INTERCHANGEABLE GLUE POT UNIT
The Minimax ME 40 edge bander features an interchangeable glue pot with a quick heat-up system. The glue pot is Teflon coated to allow for easy clean up and easy glue replacement. The system easily applies the glue to the panel with a vertical glue spreading roller, and the temperature is adjustable via the PLC control. This machine also has a device to automatically recover any unused glue.

TOP AND BOTTOM TRIM UNIT
The Minimax ME 40ET has a very high edge quality finishing with the rotating copy wheels. The high frequency motors generate high cutter rotating speed, reducing to a minimum any marks left from trimming and guaranteeing the absence of vibrations. These cutters are designed for straight or radius trimming of any type of edge. The edge thickness is easily set by means of two numerical readouts.

SPECIAL END-CUTTING UNIT WITH “RADIUS” FUNCTION (ME 40ET MODEL)
This station is installed in place of the standard end-cutting unit. During the process of cutting off the front and rear exceeding edges (except for solid wood strips), it rounds off the angles of the edge banded panel. This creates a beautiful radius edge. This function is directly controlled with the operator interface at the control panel. With its own independent high frequency motor running the blade at 12,000 rpm with an Ø 125mm Z12 blade, you can expect the finest finish of any edge bander in its class.

FULL CORNER ROUNDING END-CUTTING UNIT (ME 40ETR MODEL)
During the process of removal of the front and rear exceeding edge; this two stage unit cuts and rounds the edge in a single pass at the end of the panel. Driven directly from the control panel it is possible to work with only the end cutting function for thin tape, and 3mm thick banding or wood. This is the first unit in its class to have this advanced engineering, this small of a footprint and overall capabilities at a price point that allows the small to medium-sized shop to compete.

EDGE AND GLUE SCRAPE UNITS, AND BUFFING UNIT
The Minimax ME 40 features scraping and buffing stations as standard for finishing of 3mm PVC/ABS edges. The scraping system assures an excellent finish, eliminating any excess glue on the panel or edge joint and keeping it free of chatter marks, thanks to the heavy-duty structure. The precise horizontal and vertical copying wheels have chrome plated surfaces and assure accurate positioning of the knives. The buffing station includes high frequency motors for cleaning and polishing the edge. This unit is tilted and vertically adjustable to optimize the polishing and cleanliness of the work piece.

High productivity
9 m/min panel feed speed with track movement for an increased productivity. Monitoring of the panel position by encoder for a total work cycle control.
 
 
Simple and intuitive
Error-free machining is ensured by the control panel positioned on the front of the machine, that allows an easy selection of all the main functions, among them, the operating units switching on and off. The PLC guides the operator during maintenance, cleaning, diagnostic operations, etc.
 
 
Impeccable finish
New rounding unit with rigid structure for a unique quality of work in its segment. The particularly affordable price distinguishes it as the most competitive edge bander with round on the market!
 
 
Brilliant idea
The end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel without the need of the operator to have to finish by hand at a later stage.
 

ME 40ET MODEL

MACHINE CONFIGURATION
- PLC Control System.
- Panel Edge Trimming Unit for straight or radius trimming on thick or thin PVC, ABS, Melamine, Laminate or Wood.
- Interchangeable gluing unit with auto-sensory cooling to avoid burning of glue.
- Glue spreading roller with electrical resistance inside provides a uniform glue spread at maximum working temperature.
- End Cutting Unit with high frequency motor for best finishing.
- Monitors Temperature on the Roller.
- End Trim Unit with front and vertical copying wheels and high frequency motors to generate high cutter rotating speeds.
- Cutters are designed for straight or radius trimming with numerical readout setup.
- Radius Scrape for use on PVC/ABS edges with user-friendly exclusion of the device when not in use.
- Glue Scraping unit for removal of excel glue on the panel edge/joint.
- Brushing Unit for removal of excess glue on the panel edge/joint.
- Brushing Unit tilted vertically adjustable motors.

GENERAL CHARACTERISTICS
– Safety enclosure
– Control panel on machine infeed side
– Main frame made of bended and welded steel plates to ensure a high rigidity structure
– Top steel presser with two rows of rubber coated wheels mounted on bearings and enclosure that covers the wheels
– Manual adjustment of top beam with automatic positioning of the operating units according to selected panel thickness
– Numeric indicator of the selected panel thickness
– Feed track made of pads coated with high friction rubber fixed on a ¾ industrial chain. Two sliding pad guideways, one round and one flat, to ensure straightness of movement and resistance to side loads. Manual pad lubrication.
– Panel support roller which can be extended on the entire length of the machine
– Specific exhaust outlets for glue pot, pre-milling unit, and trimming unit
– PLC and 4” graphic display with large and luminous characters, selection of working language, keyboard with “soft touch” pushbuttons and led light, adjustment and indication of the glue pot temperature encoder positioned on the panel feed track pinion
– Padlockable main switch and overload protection
– Emergency pushbutton

 

ME 40ETR CORNER ROUNDING MODEL

MACHINE CONFIGURATION
- PLC Control System.
- Panel Edge Trimming Unit for straight or full-corner rounding on thick or thin PVC, ABS, Melamine, Laminate or Wood.
- Interchangeable gluing unit with auto-sensory cooling to avoid burning of glue.
- Glue spreading roller with electrical resistance inside provides a uniform glue spread at maximum working temperature.
- End Cutting Unit with high frequency motor for best finishing.
- End Trim Unit with front and vertical copying wheels and high frequency motors to generate high cutter rotating speeds.
- Cutters are designed for straight or full-corner rounding with numerical readout setup.
- Radius Scrape for use on PVC/ABS edges with user-friendly exclusion of the device when not in use.
- Glue Scraping unit for removal of excess glue on the panel edge/joint.
- Brushing Unit for removal of excess glue on the panel edge/joint.
- Brushing Unit tilted vertically with adjustable motors.

GENERAL CHARACTERISTICS
- Safety enclosure
- Control panel on machine infeed side
- Main frame made of bended and welded steel plates to ensure a high rigidity structure
- Top steel presser with two rows of rubber coated wheels mounted on bearings and enclosure that covers the wheels
- Manual adjustment of top beam with automatic positioning of the operating units according to selected panel thickness
- Numeric indicator of the selected panel thickness
- Feed track coated with high friction rubber fixed on a ¾ industrial chain. Two sliding pad guideways, one round and one flat, to ensure straightness of movement and resistance to side loads. Manual track lubrication.
- Panel support roller which can be extended on the entire length of the machine
- Specific exhaust outlets for glue pot, pre-milling unit, and trimming unit
- PLC and 4” graphic display with large and luminous characters
- Selection of working language
- Keyboard with “soft touch” pushbuttons and led light
- Adjustment and indication of the glue pot temperature encoder positioned on the panel feed track pinion
- Padlockable main switch and overload protection
- Emergency pushbutton

Minimax ME 40
Work table dimensions mm 3465 x 710
Min. - max. thickness of rolled edges mm 0.4 - 3
Max. thickness of edges in strips mm 5
Min. - max. panel height mm 8 - 50
Min. panel length/width mm 190/110
Feed speed m/min 9

ME 40ET MODEL

TECHNICAL SPECIFICATIONS
Worktable dimensions: 136.4” x 28” (3465mm x 710mm)
Min / max thickness of rolled edges: 0.4 - 3mm
Max thickness of edges in strips: Up to 5mm
Min. – max. panel height: 8mm - 50mm (.315” – 1.96”)
Min panel length/width: 190mm / 110mm (7.48”/4.33”)
Feed motor power: 0.73 Hp (.55 kW)
Feed speed: 9 m/min (29.5 fpm)
Operating temperature: 68 - 374°F (20 - 190°C)
PREMILLING UNIT
Motor power: 3 Hp (2.2 kW)
Diamond cutter: Ø 80mm Z2 H=56
Blade rotation speed: 7,200 rpm
Stock removal: 0.5 / 1 / 1.5 / 2 mm
GLUE POT UNIT
Motor power: 0.33 Hp (.25 kW)
Glue capacity: 1.76 lbs. (.8 kg)
END CUTTING UNIT
Motor power: 0.25 Hp (.19 kW)
End cutting blade: Ø 125mm Z20
Blade rotation speed: 12,000 rpm
TRIMMING UNIT
Upper/lower motor power: 2x .47 Hp (.35 kW)
Widia cutters: Ø 55.3 mm Z3
Cutters rotational speed: 12,000 rpm
Vertical/horizontal copying devices: Rotating/rotating
BRUSHING UNIT
Motor power (each): 0.18 Hp (.14 kW)
Rotation speed: 2,800 rpm
Electrical: 3-phase, 230v
Pneumatic operating pressure: 6.5 bar
Exhaust Outlet pre-milling unit diameter (x2): 60mm (2.36”)
Exhaust Outlet glue pot unit diameter: 80mm (3.15”)
Exhaust Outlet Diameter (x2): 120mm (2.36”)
**Specifications are subject to change**

 

ME 40ETR CORNER ROUNDING MODEL

TECHNICAL SPECIFICATIONS
Worktable dimensions: 
136.4” x 28” (3465mm x 710mm)
Min / max thickness of rolled edges: 0.4 - 3mm
Max thickness of edges in strips: Up to 5mm
Min. – max. panel height: 8mm - 50mm (.315” – 1.96”)
Min panel length/width: 190mm / 110mm (7.48”/4.33”)
Feed motor power: 0.73 Hp (.55 kW)
Feed speed: 9 m/min (29.5 fpm)
Operating temperature: 68 - 374°F (20 - 190°C)
PREMILLING UNIT
Motor power: 
3 Hp (2.2 kW)
Diamond cutter: Ø 80mm Z2 H=56
Blade rotation speed: 7,200 rpm
Stock removal: 0.5 / 1 / 1.5 / 2 mm
GLUE POT UNIT
Motor power: 
0.33 Hp (.25 kW)
Glue capacity: 1.76 lbs. (.8 kg)
COMBINED END CUTTING-ROUNDING UNIT
Motor power: 0.25 Hp (.19 kW)
End cutting blade: Ø 125mm Z12
Blade rotational speed: 12,000 rpm
TRIMMING UNIT
Upper/lower motor power: 
2x .47 Hp (.35 kW)
Widia cutters: Ø 55.3 mm Z3
Cutters rotational speed: 12,000 rpm
Vertical/horizontal copying devices: Rotating/rotating
BRUSHING UNIT
Motor power (each): 
0.18 Hp (.14 kW)
Rotation speed: 2,800 rpm
Electrical: 3-phase, 230v
Pneumatic operating pressure: 6.5 bar
Exhaust Outlet pre-milling unit diameter (x2): 60mm (2.36”)
Exhaust Outlet glue pot unit diameter: 80mm (3.15”)
Exhaust Outlet Diameter (x2): 120mm (2.36”)
**Specifications are subject to change**

MINIMAX ME 40 EDGEBANDER VIDEO

Powered by Top Rated Local®