Used 2004 SCM DMC Unisand 2000 US 1100 M4

A 2004 SCM DMC Unisand 2000 US-1100 M4 is a capable 4-head, 43″ wide wide‑belt sander designed for calibration to finishing of wood panels. It combines high throughput with precision control and is suitable for industrial woodworking operations.

43” (1095mm) Maximum panel width • 2" (52mm) Minimum panel width • 16" (400mm) Minimum panel length • 6-5/8" (170mm) Maximum panel height • 3/16" (4mm) Minimum panel height • Infeed and outfeed rubber covered hold down rolls • Motorized Part Thickness adjustment with digital readout, (4) Screw jacks for table raise and lower • 6 to 40 Feet per minute Inverter Controlled by 3 HP motor Variable Speed Vacuum Feed Conveyor with Ferrari 12 HP (9 KW) fan motor

Capable of calibrating core board, sanding veneer, and sealer/lacquer sanding; 43” wide capacity. 1st Head: 12-1/2"" diameter 85 steel contact roll with 47 HP motor; 2nd head: rubber contact roll with 39 HP motor ; 3rd head: rubber contact roll - 34 HP motor variable speed with inverter and reverse rotation; 4th head: Polishing head with 24 HP motor for sealer/lacquer; turbo blowers to clean panels

Industrial Machine with Heavy-Duty Structure Useful Working Width 1090 mm Automatic belts oscillation Worktable with Fixed Height (Movable Head). for This Feature the Machine can also Work in a automatic Production Line Front and Rear Rubbered Pression Rollers of the Working Units Unit with Roller to Calibrate, Grooved Steel Roller, Motor Power 25 KW ( 2900 RPM) Unit with Roller to Calibrate Sand - Grooved Steel Roller, Diameter 200 mm, Motor Power 18,5 ( 2900 RPM) Panels Cleaning Unit with Rotating Brush Command Board Installed on a Separated Electrical Cabinet to Control the Machine Separated Electrical Cabinet Aspiration Dust Fans Emergency Device to Save Hands While Pieces Infeeding Industrial Machine with Heavy-Duty Structure Automatic Belts Oscillation Motor Power of the Feeding Carpet 6 KW Front Pression Shoes of the Working Units Rear Pression Shoes of the Working Units.