Balestrini Pico TN

by SCM

CNC milling, tenoning, mortising machine for kitchen furniture doors and furniture fronts. The balestrini pico md3 machine is specifically designed to cut a special 45° or 90° joint ideal for furniture door frames, table tops, front frames of chest of drawers, etc. It is equipped with two working units moving on two interpolated axes. One units cuts ends and tenons, while the other unit makes holes or slots.

Maximum productivity (with Miter Doors cycle): up to 200 tenons and 200 mortises in 1 h, 1 frame in 72 sec.
Reduced time of set-up, machine suitable for small batches, programs selectable in just a few seconds.
Pendulum machining on the left-hand and right-hand of the worktable.

Execution of joints at 45°, Miter Doors type, programmable by macro. Pre-set paths to avoid splintering on solid wood profiled elements or tear-out on coated MDF.

Execution of joints at 90°, French Joint type, programmable by CAD CAM T-CAS Entry pre-installed on the machine.

Execution of joints on profiled doors and windows elements with particular tenons and mortises, programmable by CAD CAM T-CAS Entry pre-installed on the machine.

Workable piece dimensions  
Width x thickness with cut at 45° 110x70 mm
Width x thickness with cut at 0° 155x70 mm
Min. workpiece length 100 mm
Tenons dimensions  
Max. tenon length 0÷150 mm
Tenon thickness max 0 - 20 mm
Tenon depth 5 - 15 mm
Mortise dimensions  
Mortise length 0÷150 mm
Mortise thickness 0÷16 mm (double with interpolation)
Mortise depth 0÷30 mm
Maximum Productivity Minimum time cycle to execute a tenon and a mortise 18 sec.
Powered by Top Rated Local®