Click or scroll to zoom
Tap or pinch to zoom
ACMOS 101-5001
Acmos 101-5001 is a silicone-free, proactive release agent for various cold gluing woodworking applications that use PVA white glues (D2, D3, D4). It prevents adhesive residues from adhering to all surfaces of the machinery that contact with the glue, such as clamps, fences, guiding plates, press platens, tooling, etc.
Features
- Silicone-free formula ensures no greasy residue affecting post-treatment
- Safeguards machinery ad surfaces exposed to glue contact
- Wood surfaces do not stick to machinery surfaces
- Light-colored or sensitive woods remain unaffected or unblemished
- Compatible with PVA white glues (D2, D3, D4)
- Consistent application eliminates the necessity for abrasive cleaning techniques
Application: Spray / Pull-Bar - Apply as thinly as possible. When using cold gluing equipment, clamps or similar products, apply it the evening before and allow it to set before operation, ensuring the release film forms flawlessly and dries on the machine.
Recommended Uses: Clamps, machinery like cold gluing equipment, finger jointers, veneer press machines, cold press platens, and other tooling and machine surfaces and components that interact with the PVA glue.
NON Hazardous/Hazmat for DOT Shipping
Available Container Amounts:
Kg: 1 (Qty 12 Sold by Case) | 20 | (2-pack) 40
Gallons: 0.3 (Qty 12 Sold by Case) | 5.6 | (2-pack) 11.2
TECHNICAL DATA SHEET:
Range of application:
Release Agent for white glue.
Properties:
Emulsion of active ingredients in water.
Physical and chemical properties:
Form: Gel
Appearance: Light Yellow
Smell: Characteristic
Density at 20°C: 0.95 g/ml ; DIN 51757
pH-value (0 g/l): 7.00
Active Substances: 15,53
Flashpoint: 54°C ; EN ISO 2719
Viscosity at 20°C: > 60 sec ; Flow cup 4mm DIN EN ISO 2431
Stockage:
Storage temperature: between 10°C and 30°C
Maximum Storage: approx. 9 months
Processing:
Why release agents are important
Release agents are critical to prevent glue and adhesives from sticking on both edgebanding machining tools and workpiece surfaces. They are developed in a liquid form and as such can be used in both automatic and manual edge processing.
Release agents are sprayed on the top and bottom of the workpiece edge areas. This prevents adhesive residue from sticking to the workpiece. Release Agents work with a variety of glues and adhesives for high-quality woods, veneers, and plastic-coated surfaces.
Advantages
Reduces production downtime due to cleaning. The process of edging can lead to unwanted glue residue on materials and equipment. Without the use of a release agent, glue residue can quickly stick and become very difficult to clean and remove. This results in a loss of production and machine downtime. Production employees are forced to spend valuable time cleaning up, instead of streamlining the manufacturing process. By using a release agent, a thin, barely visible lubricant film is formed, which prevents the adhesion of glue residues, thus avoiding time-consuming cleanup work.
Helps maintain production equipment. A common problem with edge processing is undesired glue buildup on machining tools. Glue buildup can cause unnecessary wear and tear on tools and lead to increased machine maintenance and costs. The continuous use of release agents protects the components of an edgebander, such as pressure rollers, trimming tools, hot melt adhesive tanks and buffing wheels against glue buildup. Using release agents is very important to the longevity of equipment.
Promotes high-quality finishes. Perfect, high-quality surfaces are a premium for edgebanding. During application, glue squeeze out occurs, which often creates glue lines and residue, thus affecting the quality of finished products. Release agents used during the edgebanding process prevent adhesive residues from sticking, while protecting the edge and foil from marks and friction, thus providing excellent surfaces.
