Click or scroll to zoom
Tap or pinch to zoom
Used JLT #717A-38V-96H-HD-2CC-M-M1 Cabinet Door Clamp
Click or scroll to zoom
Tap or pinch to zoom
Used JLT #717A-38V-96H-HD-2CC-M-M1 Cabinet Door Clamp
Click or scroll to zoom
Tap or pinch to zoom
Used JLT #717A-38V-96H-HD-2CC-M-M1 Cabinet Door Clamp
Click or scroll to zoom
Tap or pinch to zoom
Used JLT #717A-38V-96H-HD-2CC-M-M1 Cabinet Door Clamp
Click or scroll to zoom
Tap or pinch to zoom
Used JLT #717A-38V-96H-HD-2CC-M-M1 Cabinet Door Clamp
Click or scroll to zoom
Tap or pinch to zoom
Used JLT #717A-38V-96H-HD-2CC-M-M1 Cabinet Door Clamp
Used JLT #717A-38V-96H-HD-2CC-M-M1 Cabinet Door Clamp

Used JLT #717A-38V-96H-HD-2CC-M-M1 Cabinet Door Clamp

by JLT
$10,000.00
Payment Calculator
Financing Request
SKU WSIUSEDJLT717A-38V-96H-HD-2CC-M-M1

This is a used JLT Clamps pneumatic miter and cabinet door clamp manufactured by James L Taylor Mfg Co in Poughkeepsie, NY. Built on a heavy-duty blue painted steel A-frame with steel clamping beams, this model 717A-38V-96H-HD-2CC-M-M1 machine is designed for clamping and squaring miter doors as well as stile and rail cabinet doors. It features a 38-inch vertical by 96-inch horizontal capacity and is equipped with four individual yellow dial pressure regulators (two on the left side and two on the right side), two vertical clamping bars, two horizontal clamping bars, a single-lever pneumatic control valve, and a frame-mounted air filter/regulator unit with a pressure gauge.

  • Pneumatic clamping operation controlled by a single hand lever valve on the lower left frame
  • Four individual dial pressure regulators graduated from 0 to 160 PSI with an OFF position (two mounted on the left upright, two mounted on the right upright)
  • Two vertical clamping bars and two horizontal clamping bars with perforated adjustment holes for sizing changes
  • Yellow movable vertical squaring carriage assembly with top and bottom guide rollers and a mechanical linkage bar
  • Heavy-duty blue steel A-frame construction
  • Frame-mounted pneumatic filter/regulator unit with pressure gauge, lockout valve, and black air supply hose
  • Coiled overhead pneumatic airline feeding the movable vertical clamp assembly
Specification Value
Manufacturer James L Taylor Mfg Co (JLT Clamps)
Manufacturing Location Poughkeepsie, NY
Model Number

717A-38V-96H-HD-2CC-M-M1
Clamping Capacity 38 in. Vertical x 96 in. Horizontal
Power Source Pneumatic
Number of Vertical Clamps 2
Number of Horizontal Clamps 2
Pressure Regulators 4 Individual Dial Regulators (0 - 160 PSI)
Air Preparation Frame-mounted Filter / Regulator with Gauge
Activation Control Manual Single-Lever Pneumatic Valve
Frame Construction Painted Steel A-Frame
Powered by Top Rated Local®