All

CNC Specialty: https://cnc-specialty-store.com/grease-lubrication/grease-oil/kluber-microlube-gl-261-400g-0201950591 - $90 less 5% = $85.55. SCM Pa...

The exclusive CAM design of these lift tables provides maximum capacities (up to 30,000 lbs.) with minimum height clearances. Features Capacities ...

The L115 Edge Foiler shape the profile, sand it smooth and apply the dry-transfer finish foil on MDF consecutively in one continuous process. Stock...

The L117 Edge Foiler shapes the profile, sands it smooth and applies the dry-transfer finish foil on MDF in a single continuous process. Stock is t...

The L217 Double-End Foiler profiles, sands, and applies dry-transfer finishing foil to both edges of MDF parts in one continuous pass. Designed for...

The L73 Contour Foiler applies transfer-finishing foil to the non-linear, pre-shaped, and sanded edge of your MDF part without any template. The fe...

The L79 End Finisher is designed to precisely cut MDF louver parts to length, then sand both ends. Next, to complete the one-pass process, an appli...

The L80 Surface Foiler is a high-speed heat transfer foil laminator. The hot-stamp surface foiler applies dry-transfer finishing foils to the surfa...

The L85 Surface Foiler uses dry-transfer finish technology applying a transfer finish on panels up to two feet in width. You can finish doors, cabi...

The L86 Surface Foiler will apply a variety of transfer foil finishes to MDF and other substrate panel faces up to 36 inches wide. The substrate is...

Lamello Spiral drill bit Ø 6mm with centering point for the Clamex P-10 and P-14 systems. Introducing the Lamello 6mm Brad Drill Bit, the perfect t...

This 7mm thick carbide-tipped groove cutter, designed for use with Lamello's Zeta P2, measures 100.9mm x 7mm x 22mm and features 3 teeth for eff...

This 7mm thick diamond-tipped groove cutter, designed for use with Lamello's Zeta P2, measures 100.9mm x 7mm x 22mm and features 3 teeth for effici...

Bisco P is an alignment element that is part of the Clamex P system. It is easily installed using the Zeta P2 or CNC as it fits easily into the P-s...

C20 is an element made of white, translucent plastic in the same dimensions as the no. 20 biscuit. C20 is applied with adhesive for solid surfaces,...

The Lamello Cabineo Hex Bit is specifically designed to be used with Lamello Cabineo connectors. Features Extra long 120mm ball-end 4mm hex bit wi...

Introducing the Lamello Cabineo 4mm Magnetic Hex Drive Tool with Handle - the perfect tool for effortless and precise installation of the Cabineo c...

Introducing the Lamello Cabineo 8 and 12 Connectors – the perfect solution for fast and easy assembly of cabinets, shelving units, and other furnit...

 Cabineo 8 M6 is a one-piece cabinet connector which can be used with all CNC machines because only surface machining is required. The connector is...

Threaded Insert Nuts for Cabineo 8 M6 Connectors, includes (1) Cabineo Installation Tool.  Use the M6 x 12.3 size for material thicknesses of 14 -...

Introducing the Lamello Cabineo 8 M6 Installation Tool, the perfect solution for achieving precise and easy installation of Cabineo 8 M6 connectors...

Introducing the Lamello Cabineo 8 M6 Starter Set, the perfect solution for getting started with the innovative Cabineo 8 M6 connector system. This ...

Cabineo is a one-piece cabinet connector which can be used with all CNC machines because only surface machining is required. The Cabineo is install...

Cabineo is the newest connector from Lamello, and is an outstanding solution for cabinet shops and manufacturers using nested-based CNC routers. Th...

Several visually appealing ways to incorporate Cabineo connectors: Colored cover caps, matching color to make the Cabineo blend into the background...

Lamello 15mm Diameter Cabineo drill is specifically designed to be used in CNC routers to allow the precise installation of Lamello Cabineo fitting...

Introducing Lamello Clamex 6mm cover caps, the perfect solution to add a professional and clean finish to your furniture projects. These cover caps...

Clamex P Medius complements the Clamex P-14 connectors for use in shelving units where two shelves meet the dividing panel at the same height. Medi...

Introducing the Lamello Clamex P Flexible Install Tool, the perfect solution for fast and precise installation of Clamex P-System connectors. This...

Clamex P-10 Detachable Furniture Connectors, with Lockable Cam Lever using Allen Wrench for Material Thicknesses of 13mm+  Clamex P-10 is a detacha...

Clamex P-14 Detachable Furniture Connectors, with Lockable Cam Lever using Allen Wrench for Material Thicknesses of 16mm+  Clamex P-14 is a detacha...

The Flexus version of the Clamex P-14/10 connector features flexible positioning pins in place of the rigid torsion tabs found on the standard Clam...

Clamex S is a detachable connector that is screwed into an 8 mm groove and connected via a lever. The 8 mm groove cutter for Clamex S can be used w...

Clamex S-20 is a detachable connector for the Lamello system for material thicknesses from 16mm and is fastened in the groove with screws. The symm...

Lead Time: Beginning of April, 2024 Introducing the Clamex S-20 Drilling Jig: for seamless access to the Clamex S-20 locking mechanism. Engineered ...

Elevate your assembly process with this jig, crafted exclusively for the Clamex S-20 connector system, to ensure precise drilling for the 6mm locki...