Festool

Of stainless steel, 3-piece Advantage 3 piece, 37 1/2" (950 mm) D 36. Technical Data Length  37-13/32" (950 mm)

Anti-static, stackable dust container used for additional dust capacity of the CT CYCLONE. Reduced necessary dust bags by handling high volume...

Provides filtration at 99.97% efficiency to 0.3 microns Breathe easier in the shop or the jobsite with HEPA filtration Fits CT MINI and CT MIDI 20...

HEPA Main Filter captures 99.99% of particulate matter down to 0.3 microns, helping you work cleaner and breathe easier. Advantages Compatible with...

Provides filtration at 99.97% efficiency to 0.3 microns Breathe easier in the shop or the jobsite with HEPA filtration Fits CT Mini and CT Midi A...

Advantages 32-Tooth blade for use with Festool HK and HKC 55 saws. For use with wooden materials, coated panels, MDF, fine cut. 160mm diameter, 1...

28 tooth; 2.2mm kerf; 20mm arbor; 15 deg hook angle; ATB Clean cutting general purpose blade for wood and soft plastics; fine rip cut blade for gl...

  The new Granat Net abrasive is the perfect solution for sanding materials that produce a large amount of dust. The open net structure enables dus...

Filtration of 99.9% of particles down to 1 micron in size Replacement for the original, factory-installed filter for CT 36 AutoClean model Easy, t...

Designed for rapid positioning and clamping of Festool FS Guide Rails to all types of sheet good material One-handed trigger action enables qui...

  Secure your workpiece for precision cutting, sanding, routing, sanding, or just about any other application. Designed for all clamping appli...

Advantages 18-Tooth blade for use with Festool HK and HKC 55 saws. For use with wooden materials, building panels, soft plastics, and coarse cuts. ...

12 tooth; 2.2mm kerf; 20mm arbor; 20 deg hook angle; ATB Coarse cutting rip blade for use with building panels, wood and soft plastics Oversized...

Utilizing suction from a CT Dust Extractor, the CT Wings provide an additional support for mounting long items to a wall like molding, or holding ...

Ideal for sanding flat surfaces Hard version High temperature durability High edge solidity For plain surfaces and narrow edges MULTI-...

MultiJetstream2 design increases air flow for highly efficient dust extraction and increased air flow for cooler running and longer pad life. Supe...

Designed as key system components to the Festool MFT and Guide Rail systems, Festool Screw Clamps secure your workpiece for precision cutting, sand...

For using the edge bander on delicate or high-gloss surfaces Advantages The optional StickFix Base for the CONTURO Edge Bander helps protect delica...

Standard 1 micron paper replacement filter Designed to trap particles down to 1 micron while maintaining airflow, allowing you to reach full capac...

The perfect complement to the Festool MFT or Guide rail system, the Festool Quick Clamp secures your workpiece for precision cutting, sanding, rout...

For using the edge bander on delicate or high-gloss surfaces Advantages Replacement felt pad for use with the CONTURO StickFix Base. Pack of 10. In...

Filtration of particles down to one (1) micron in size. Should not be used for applications requiring HEPA filtration. Advantages Replacement fil...

Standard 1 micron paper replacement filter Traps particles down to 1 micron while maintaining airflow, allowing you to reach full capacity without...

An extremely soft foam pad, the interface pad allows the abrasive to float, producing smoother results on delicate profiles and contours For super...

Replacement or extension guide plates for the stationary use of the edge bander with adapter plate AP-KA 65 in MFT (with perforated board KA 65, or...

Extremely soft foam pads, the interface pads allow the abrasive to float, producing smoother results on delicate profiles and contours For superfi...

Polypropylene (PP) with air regulating slide to adjust suction power. To connect tubes to extraction hose for comfortable grip. Antistatic Wi...

2 3/8in Magnetic bit holder enables use of standard bits with Centrotec Chuck. The Centrotec shank is designed for use with the Festool Centrotec ...

Standard 1-micron replacement filter. Measured in microns, wood dust is particularly troublesome to remove from an environment once it is airborne....

Connect a limitless number of guide rails for long cuts with Festool Guide Rail Connectors Steel bars with 4 set screws secure connectors, ensurin...

Disposable dust liners for the CT CYCLONE container bins. Ideal for containing and disposing dust without quick access to a dumpster. Feature a ma...

The all-new Granat abrasive by Festool is a ceramic-grain coated abrasive material that was developed specifically for commercial applications in ...

Unfilled EVA adhesive – perfect join quality on black decor EVA universal adhesive with high melting point High softening range of approx. 16...

The versatile ETS 125 has our finest sanding stroke at 5/64" (2.0 mm), and is the ideal one-handed machine for maximum surface quality when finis...

The CTC SYS REQUIRES two Festool 18v standard format batteries. (Not included.) It can accept 3.2Ah & 4.0Ah batteries, but will not accept 5.2A...

Re-usable heavy-duty Filter Bag with integrated cap. Designed for easy and fast debris disposal. Compatible with the CT SYS mobile dust extractor. ...