Click or scroll to zoom
Tap or pinch to zoom
- Innovative JET - Precision Air Strut System (PASS) provides consistent upward pressure on the cutterhead, reducing the chance of board snipe
- Helical Cutterhead houses 48 staggered carbide knives that are engineered to align themselves without any adjustment for a superior finish and quieter cut
- Heavy-duty precision ground cast iron table and four post design provides maximum control and support when passing boards through planer.
- Powerful 3-HP motor with v-belt transmission reduces vibration and running noise
- Dual infeed speed control for 16fpm or 20fpm, maximizes cut efficiency
- Maximum depth of cut 1/8, 6 cutting height and 15 width capacity
- Large hand wheel with positive gear drive easily moves the head to the desired board thickness
- Magnetic Switch with green safety light illuminates when powered
- 4 Dust Port hooks up to dust management system and helps keep shop clean
| Height | 44.880 |
| Length | 29.920 |
| Gross Weight | 330.500 |
| Net Weight | 286.000 |
| Volume | 20.803 |
| Width | 26.770 |
| Ready For Web (US) | Yes |
| Prop 65 | Cancer and Reproductive Harm |
| Movement - Horizontal (In.) | |
| Segmented Infeed Roller Diameter (In.) | |
| Cutterhead Speed (RPM) | 5,200 |
| Maximum Depth of Cut (In.) | 1/8 |
| Feed Rate (FPM) | 16 and 20 |
| Outfeed Table Length (In.) | |
| Motor Power (HP) | 3 |
| Knife Size (L x W x T) | |
| Dust Collection Minimum CFM Required (CFM) | 600 CFM |
| Number of Speeds | 2 |
| Number of Knives | 48 |
| Digital Readouts | |
| Maximum Planing Thickness (In.) | 6 |
| Distance Between Rollers - Center to Center (In.) | |
| Recommended Circuit Size (Amps.) | |
| Outfeed Roller Diameter (In.) | |
| Reversible | |
| Maximum Height of Rollers Parallel to Tabletop (In.) | |
| Cutterhead Diameter (In.) | 2-5/8 (68mm) |
| Motor Amps | 15 |
| Cuts Per Minute | Continuous |
| Range of Speeds | |
| Dust Port Outside Diameter (In.) | 4 (102mm) |
| Bed Rollers Adjustable from Front | |
| Motor Phase (PH) | 1 |
| Table Height from Floor (In.) | |
| Table Size with Extensions (L x W) (In.) | 15 x 49.2 in. |
| Prewired Voltage (V.) | |
| Movement - Vertical (In.) | |
| Number of Rollers | |
| Type of Cutterhead | Helical Head |
| Maximum Planing Width (In.) | 15 |
| Column Diameter (In.) | |
| Minimum Planing Length (In.) | 5.6 |
| Wiring Remarks | |
| Motor Voltage (V.) | 230 |
| Infeed Roller Diameter (In.) | |
| Style (Type) | SV_1375591258781 |
| Table Support | |
| Maximum Full Width Depth of Cut (In.) | 1/8 |
| Table Size (L x W) (In.) | 15 x 46.5 in. |
