Lamello P System

The Clamex cover caps serve to cover the Clamex P drill holes. They are available for 90° joints as well as 45° joints. There are eleven colors ava...

The Zeta P2 is the profile biscuit joiner for P-System anchorage, and the Clamex P connector range in particular, and is used to connect wood mater...

With the Divario, shelves or separation walls can be inserted into pre-assembled structures. Additionally, the Divario P-18 also clamps the compone...

Bisco P is a plastic element and part of the P-System range of connecting fittings. The aligning element fits into the 7 mm wide P-System groove bu...

With the Divario shelves or separation walls can be inserted into pre-assembled structures. Additionally, the Divario P-18 also clamps the comp...

Clamex P-10 is a knock down fitting based on the P-System anchorage and is connected via a lever. Compared to Clamex P-14, Clamex P-10 possesses a ...

The Cabineo is a one-piece cabinet unit fitting and is installed into a drilled or routed shape. No edge drilling is necessary - the machining happ...

Clamex P Medius complements the Clamex P-14 connecting fittings for use in shelf units where two shelves meet the dividing panel at the same height...

Clamex S is a detachable connector that is screwed into an 8 mm groove and connected via a lever. The 8 mm groove cutter for Clamex S can be used w...

Simplex is a two-part knock down connecting fitting for detachable constructions and is anchored in the groove with PUR adhesive. It features a sto...

Clamex P-14 is a detachable furniture fitting on the basis of the P-System anchorage and is connected with a lever. The form-locking P-System ancho...

C20 is an element made of white, translucent plastic in the same dimensions as the no. 20 biscuit. C20 is applied with adhesive for solid surfaces,...

K20, the clamping element that serves as a glueing aid for work pieces that are difficult to clamp, e.g. bulkheads, HVAC chases, etc. K20 is applie...

The Tenso P-10 is a unique gluing aid, which eliminates the need for clamps or presses. Developed for mitres (45°) from a material thickness of 15 ...

E20 is a self-clamping connector that can be installed with any Lamello biscuit joiner. The curved ridges anchor it in the work piece without glue ...