Cantek CFS100 Automatic Defect Cutoff Chop Saw

Cantek CFS100 Automatic Defect Cutoff Chop Saw

by Cantek

$57,900.00

Payment Calculator

Financing Request

SKU WSI-CantekCFS100

Quantity

An economical and high-speed approach to defect cross-cutting with partial optimization.

The Cantek CFS100 Automatic Defect Cutoff Chop Saw is the perfect upgrade from your manual cutoff saw with 3 to 5 times higher production output. It is designed to scan for defects in your material which are indicated by a florescent crayon mark. The saw will cut on the crayon mark allowing for fast defect removal. Equipped with several cutting modes like fixed, sequential, defect cutting modes the operator can select the program most suited to their needs. The powerful 10HP motor and 18” blade provide for effortless cutting from 11.8” (w) x 2.75” (t) or 5.9” (w) x 3.9” (t). An optional feature is available for cutting thin material down to 0.078” (2mm) which is ideal for lamellas for engineered flooring.

For flooring companies, the CFS100 can be combined in-line with our EM12 End Matcher for a highly efficient defecting & end matching solution.

Ideal for the defect cutting wood mouldings, wood flooring, finger joint blocks, wood paneling and more!
Machine scans for defects marked with a florescent crayon allowing for high-speed defecting
Provides 3 to 5 times higher production rate than manual cut-off saws.
5% increase in material yield over manual cutting operations
+/- 1mm (0.0393”) accuracy
Safe operation with automatic feeding and comprehensive safety guards
Partial optimization with sequential and fixed part cutting functions or simply cut out defects

User friendly touch screen control with on board synoptics, cutting counter, and menu based cutting modes
Servo driven feed motor for fast accurate motion and position control
Compact design requires less space than manual cutting setups
18” diameter blade provides a large cross cutting capacity
Powerful 10HP motor running at 3200PRM
Adjustable automatic trim of front and tail of the workpiece
48″ (1.2 meter) long infeed table (Longer available on request)
40″ (1 meter) long flat outfeed table
Defect blowing system combined with computerized logic control permits the blowing time and the length of defect to be set as desired

Saw Motor	10HP
Saw Spindle Speed	3200 RPM
Feed Motor (Servo motor)	2.7HP (2Kw)
Max. feed speed	Variable to 262 ft/min (80 m/min)
Max. infeed weight	44 lbs (20 kgs)
Circular Saw Diameter	Ø 18” (455mm)
Saw spindle diameter	30mm
Minimum distance between marks	0.787” (20mm)
Cutting Size – maximum	See the diagram of cutting range
Air pressure: for machine	72~85 PSI (5~6 kg/cm2)
Air pressure: defect blowing system	7~9 kg/cm2 (99.5~128 PSI)
Dust ports	2 @ 4”
Electrics	460/3/60 = 14 Full Load amps (Stock Machine)
Electrics	230/3/60 = 28 Full Load amps (Factory order)
Electrics	575/3/60 = 11 Full Load amps (Factory order)

Refine

Collection

Optimizing

Cantek CFS100 Automatic Defect Cutoff Chop Saw

Cantek

Sign Up For Newsletters

Be the First to Know. Sign up for newsletter today !