SCM, DMC SD60, 43" and 53" Wide Belt Sanders

by SCM
$52,040.00
SKU WSI-SCMSD60RCS135

General Features

DMC SD 60 RCS 135 SW & VN - TWO HEAD WIDE BELT SANDER

  • Grooved rubber coated pressing rollers before and after working unit
  • 2HP variable speed feed motor 3.5-18 m/min (12-60 FPM)
  • Y-Delta two-stage reduced voltage starter on main motor
  • Automatic Electronic Table Positioning Device
  • In-feed / Out-feed extended tables for easier part feeding
  • Pneumatic On/Off selector of both rollers and pad
  • Adjustable sanding drum and pad position for micro precision adjustment
  • Electronic digital thickness readout of work table position
  • Powered table lifting by means of four heavy duty motor and lifting columns double fastened at both top and bottom of the lifting columns to provide exceptional table stability
  •  Electronic tracking of abrasive belt
  • Pneumatic belt tensioning with center fulcrum to compensate for tapering of abrasive belt
  • Front and rear  emergency stop button
  • Amperage meter for main motors allows maximum utilization of available horsepower
  • Main disconnect switch with the ability to be locked out by padlock
  • In feed flexible steel hold down, and anti-kickback plate
  • 50 shore, negative profile (waffle style) rubber feed mat
  • LOGIC 50 K Electronic Programmer for timing/anti-dubbing of the pad

DMC SD 60 RRCS 135 SW & VN - THREE HEAD WIDE BELT SANDER

  • Grooved rubber coated pressing rollers before and after 2nd and 3rd working unit
  • Pneumatic floating pressure shoes  in first working position
  • 3HP variable speed feed motor 3.5-18 m/min (12-60 FPM)
  • Y-Delta two-stage reduced voltage starter on main motor
  • Automatic Electronic Table Positioning Device
  • In-feed / Out-feed extended tables for easier part feeding
  • Adjustable sanding drum and pad position for micro precision adjustment and pneumatic On/Off
  • Electronic digital thickness readout of work table position
  • Powered table lifting by means of four heavy duty motor and lifting columns double fastened at both top and bottom of the lifting columns to provide exceptional table stability
  •  Electronic tracking of abrasive belt
  • Pneumatic belt tensioning with center fulcrum to compensate for tapering of abrasive belt
  • Front and rear emergency stop buttons
  • Automatic emergency stop of machine for:
    • sanding belt breaking, tensioning, over tracking
  • opening of the access door to the operating groups
    • absence of compressed air
    • overload on main motors
  • Amperage meter for main motors allows maximum utilization of available horsepower
  • Main disconnect switch with the ability to be locked out by padlock
  • In feed flexible steel hold down, and anti-kickback plate
  • 50 shore, negative profile (waffle style) rubber feed mat
  • LOGIC SC Electronic Programmer for timing/anti-dubbing of the pad

Mesar” sectional pad: the best finish with any materialHigher quality results due to the special shape of the sectors that allows the operator to intervene “softly” but also in an “aggressive” way, simply by varying the working pressure. The setting of the pad position and the possibility of using foils of different thickness increases its versality.  

Logic SC” electronic programmer: easily avoid mistakesSimple and intuitive, allowing the operator to set all processing parameters in sequence and then launch them with the touch of a button. The possibility to store various work programs to retrieve the machine settings most commonly used makes it ideal even for unskilled operators.

Diamond-shaped belt: no slipping of the work pieces. The special geometry of the diamond-shaped profile of the transport belt provides the best traction surface for the work piece and with the increased support area also ensures maximum stability.

Led indicator for panel introductionSimple and intuitive, communicating to the operator where and when the panel has to be introduced into the machine and optimizing the standard wear of the sanding belt; this ensures a better quality finish and reduced machine costs.

Technical Specifications

Model

SD 60 RCS 135 SW

SD 60 RRCS 135 SW

SD 60 RCS 135 VN

SD 60 RRCS 135 VN

Working Width

1,350 mm (53”)

1,350 mm (53”)

1,350 mm (53”)

1,350 mm (53”)

Number of Heads Available

2

3

2

3

Material Type

Solid Wood

Solid Wood

Veneered / Painted Panels

Veneered / Painted Panels

Feed Motor

2 HP with inverter

3 HP

2 HP with inverter

3 HP

Feed Speed

12 to 60 fpm

12 to 60 fpm

12 to 60 fpm

12 to 60 fpm

Maximum Work piece Thickness

170 mm (6.69”)

170 mm (6.69”)

170 mm (6.69”)

170 mm (6.69”)

Minimum Work piece Length

12.5 inches

12.5 inches

12.5 inches

12.5 inches

Abrasive Belt Size

53” X 85”

53” x 85”

53” x 85”

53” X 85”

Compressed Air Requirements

6 Bar (88 PSI.)

6 Bar (88 PSI.)

6 Bar (88 PSI)

6 Bar (88 PSI.)

Dust Outlets

2 outlets @ 195 mm (7.75”)

3 outlets @ 195mm (7.75”)

2 outlets @ 195 mm (7.75”)

3 outlets @ 195 mm (7.75”)

Exhaust Requirements

3,544 CFM

3,750 CFM

3,544 CFM

3,750 CFM

Power Requirements

150 amps @ 230 Volts/3 phase

96 amps @ 460 Volts/3 phase

130 amps @ 230 Volts/3 phase

60 Volts/3 phase

 

Technical Specifications

Sander Model   110 135
Working width mm 1,100 1,350
Min. - max. working thickness                                                  mm 4 - 170 4 - 170
Sanding belts width mm 1,115 1,370
Sanding belts length mm 2,150 2,150
Motor power 1st group kW (Hp)    11 (15)   11 (15)
Motor power 2nd group kW (Hp) 11 (15) 11 (15)
Feed belt speed m/min 4.5/9 4.5/9

DMC SD 60 KRCS 110 - 43" WIDE BELT SANDER - PLANER, ONE RUBBER DRUM ROLLER, ONE COMBINATION HEAD

DMC SD 60 RCS 135 - 53" WIDE BELT SANDER - RCS VERSION

DMC SD 60 RCS 135 - 53" WIDE BELT SANDER - ONE STEEL DRUM ROLLER, ONE COMBINATION HEAD

DMC SD 60 RCS 135 - 53" WIDE BELT SANDER - RCS VERSION

DMC SD 60 RRCS 135 - 53" WIDE BELT SANDER - ONE STEEL DRUM ROLLER, ONE RUBBER DRUM ROLLER, ONE COMBINATION HEAD

DMC SD 60 RRCS 135 - 53" WIDE BELT SANDER - RRCS VERSION

SCM DMC SD 60 | 43" & 53" WIDE BELT SANDER VIDEO

This video is for the Sandya 600 which demonstrates the sanding units featured on the DMC SD 60 sanders.

SCM DMC SD 30, 60, 70, 90 | NEW HMI CONTROLLER VIDEO

 

SCM DMC SD 60 WIDE BELT SANDER BROCHURE

Download Brochure

Powered by Top Rated Local®