SawStop Industrial Cabinet Saw

by SawStop
$4,715.00
SKU ICS31230

Industrial Cabinet Saw
The SawStop® Industrial Cabinet Saw is the definition of industrial grade. The heaviest, most powerful and highest-quality 10″ cabinet saw available with peace of mind only SawStop’s patented safety system can provide. Maximum safety and performance for industrial and heavy duty-cycle environments.

STRENGTH & STABILITY: The Industrial Cabinet Saw is almost 700 lbs of iron and steel

DUST COLLECTION: 99% dust collection is delivered above the table with the included dust collection blade guard, and below the table with advanced shrouding around the blade.

SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch.

Industrial 36"
36” rip capacity & T-Glide Fence Assembly | 69 1/4″ w x 36 1/2″ d x 34″ h 

Industrial 52"
52” rip capacity & T-Glide Fence Assembly | 85 1/4″ w x 36 1/2″ d x 34″ h 

• (2) Cast Iron Extension Wings 
• (1) Miter Gauge 
• (1) Dust Collection Blade Guard 
• (1) Riving Knife 
• (2) Blade Wrenches 
• (1) Push Stick 
• (1) 10” Blade 
• (1) Standard Brake Cartridge 
• (1) Owner’s Manual 
• (2) Hardware Packs 
• (1) 3mm Hex Key 
• (1) 5mm Hex Key 
• (1) 8mm Hex Key 
• (1) Blade Spacing Adjustment Gauge

Motor: (all 60Hz, TEFC): 3.0, 5.0 & 7.5hp available
Cabinet footprint: 20″ w x 25″ d
Cast iron table: 24″ w x 30″ d
Cast iron table (w/ extension wings): 44″ w x 30″ d
Extension wings: 10" w x 30" d each
Extension table 36 in rails: 24″ w x 30″ d
Extension table 52 in rails: 40″ w x 30″ d
Weights - table saw only: 530 lbs
Weights - w/ 36 in fence systems: 635 lbs
Weights - w/ 52 in fence systems: 685 lbs
Shipping weight (approx.): 640 lb (table saw only)
Blade: Prof. grade, 5/8″ arbor
Blade diameter: 10"
Blade tilt: Left
Blade kerf: 0.118″ (3mm)
Blade plate thickness: 0.078″ (2mm)
Max. depth of cut, blade at 0º: 3 1/8″
Max. depth of cut, blade at 45º: 2 1/4″
Max. rip, right of blade - 36 in: 36 1/2″ (w/ optional 36″ rails)
Max. rip, right of blade - 52 in: 52 1/2″ (w/ optional 52″ rails)
Max. rip, left of blade: 12 1/2″
Dado diameter: 8″ (requires a separate brake cartridge and insert)
Dado max. width: 13/16″
Arbor diameter at blade: 5/8″
Main bearing size: 62mm OD x 30mm ID
Second bearing size: 52mm OD x 25mm ID
Table in front of blade (max. elevation): 11″
Table behind blade (max. elevation): 9 3/4″
Arbor Runout: 0.001″ Maximum allowable runout
Table flatness measured diagonally: 0.010″ Maximum gap
Blade alignment with miter slot: 0.010″ Maximum displacement
Deviation of miter gauge indexing stops from actual: ±0.25º
Alignment between splitter and blade: 0.010″ Maximum difference
Miter slots T-shaped: 3/4″ at top, 1″ at bottom, 3/8″ deep
Miter slots center: 11 1/8″ center-to-center
Miter slots info: 5 1/2″ (arbor flange to center of right slot)
Dust collection port diameter: 4"
Riving knife / splitter thickness: 0.090" (2.3 mm)
Blade guard (dust collection): polycarbonate, extends only 1 3/16" to right of blade
Insert: zero clearance, phenolic core, melamine surfaces
Hand wheels: 8″ diameter, cast iron w/ chrome handle
Belts: 2 V-ribbed belts
Overall saw dimensions: 44″ w x 34″ d x 34″ h
Overall saw dimensions 36 in: 69 1/4″ w x 36 1/2″ d x 34″ h
Overall saw dimensions 52 in: 85 1/4″ w x 36 1/2″ d x 34″ h
Motor configuration 1: ICS31230: 3 hp, 1 phase, 230V, 13 A
Motor configuration 2: ICS51230: 5 hp, 1 phase, 230V, 20.5 A
Motor configuration 3: ICS53230: 5 hp, 3 phase, 230V, 13 A
Motor configuration 4: ICS53480: 5 hp, 3 phase, 480V, 6.5 A
Motor configuration 5: ICS73230:7.5 hp, 3phase, 230V,17.8 A
Motor configuration 6: ICS73480: 7.5 hp, 3 phase, 480V, 9 A
   

Powered by Top Rated Local®