SCM L'invincibile S 7 Xylent Planer, INCLUDES FREIGHT

by SCM
$26,875.00
SKU WSI-SCMS7TPXYLENT

The L’invincibile S 7 is a heavy duty, 24” planer designed to meet the needs of the most demanding environments. It features a monoblock base, work table with support rollers and breakthrough XYLENT technology. This technology gives an exacting finish while reducing ambient noise decibel output.

Monoblock Base
Monoblock technology is used in the design and fabrication of this base. The solid, welded base undergoes a treatment call normalization which stabilizes the metal and assures exact tolerances. All machine mechanisms are mounted, aligned, and referenced to the base. This design is vastly superior to frames that are bolted together and have no true reference point.

Electronic LED Digital Worktable Positioner
The electronic positioner for part thickness ensures maximum precision and reliability for work piece thickness set-up. Automated movement in jog, semi-auto, and programmed mode allow easy, quick and accurate positioning.

Variable Feed Speed
A variable feed system controlled by an electronic inverter is used to perfectly match feed speed with the amount of removal. The inverter additionally monitors the cutting load and automatically reduces feed speed as needed during heavier cuts.

Pneumatic Pressure Adjustment on Top Feed Rollers
Variable hold down pressure can be applied to the feed system to compensate for work piece weight, removal, or to minimize markings from the infeed rollers. The unique ability to differentially set the pressure on the infeed and outfeed rollers, allows the user to change at any time the pressure exerted on the work piece.

Two Idle Work Table Support Rollers
Used when planing raw, uneven lumber, this feature allows irregular material to be planed that would not feed on a standard table. When the material has been planed flat on one side, the rollers can be lowered to allow a clean pass on the other side.

Planer Feed Assembly
The SCM feed system includes a powered sectional steel infeed roller and powered rubber outfeed rollers. This combination helps ensure feeding of parts with variations up to 6mm in thickness. Anti-kickback fingers and a sectional chip breaker are also part of the feed section and provide both safety and a quality finish.

Vertical Roller Displacement
The stopping of the work piece and the presence of notches on its surface are eliminated due to the movement system on all three rollers that allows their vertical displacement by rotation and the best linear feeding.

Interchangeable Rollers
Quick and easy changeover of the rollers that allows the operator to configure the machine drive function in case of special requirements such as a minimum removal of fine wood and/or batches where multiple pieces of different thicknesses are processed.

XYLENT Spiral Cutterhead
This amazing SCM Group Jointer now comes with the most innovative solution for soundless planing in the world. The 24” cutterhead version comes with a spiral knife cutterblock with 3 series of knives. Totaling 105 plates of 15x15x2.5mm. These are four self-locking and self-centering screw knives. With each cutterhead you will also receive 1 dynamometric key for the correct and safe use of the locking mechanism (think of a mini torque wrench). Additionally, you will receive two inserts for the dynamometric key.

XYLENT Maintenance Kit
This kit was designed to help you get the most out of your new XYLENT cutterhead. With this kit you get one cleaning/degreasing liquid bottle for helping reduce resinous wood coatings. You will also get one dynamometric key set to 5.7 Nm, two bit Torx T20, ten inserts of 15x15x2.5mm, five M6x15 T20 screws, one brass bristle brush to clean the spindle with the mounted inserts and one steel bristle brush to help clean out the insert housings. All in a functional hardback case.

The Best Finish and Feeding Effectiveness of any material and in any working condition thanks to the pneumatic adjustment. The unique ability to differentially set the pressure on the infeed and outfeed rollers, allows to change at any time the pressure exerted on the work piece.

One Machine for Every Requirement with the Interchangeable Rollers. Quick and easy changeover of the rollers that allows the operator to configure the machine drive function in case of special requirements such as minimum removal of fine wood and/or batches where multiple pieces of different thicknesses are processed.

Best Finish at Maximum Speed with the electronic adjustment of the feed speed.

monitor scm

Feeding Rollers on Connecting Rods: Perfect Finish. The stopping of the work piece and the presence of notches on its surface are eliminated due to the movement system on all three rollers that allows their vertical displacement by rotation and the best linear feeding.

Exceptional Finish with the “Xylent” Spiral Knife (3 spiral knives)

Reduced noise during machining provides a more comfortable working environment. It also improves the dust extraction due to the production of very small chips. Each cutter has 4 tips which can be rotated into the cutting position when worn. Therefore increasing the production life of the cutter block before knives require replacement.

STANDARD EQUIPMENT
- Spiral shear cut, helical insert “XYLENT” cutterhead
- Two axes electronic control set planer table working height and feed speed
- Variable feed speeds of workpiece, inverter controlled from 4 to 20 meters a minute
- Feed speed adjustment according to the maximum energy absorption of the main motor
- Two outfeed top feed roller with rubber coating
- Interchangeable feed rollers
- Feeding rollers are on connecting rods for vertical displacement of feed (eliminates marking of the wood)
- Independent pneumatic adjustment of the pressure on the upper feed rollers
- 15hp (11kW) 60hz motor with automatic star-delta start with overload protection
- Powered bearing-assisted feed rollers
- Table lifting by four high precision jack screws
- Adjustable bed rollers in feed table
- Course and fine thickness adjustment
- Tool set including ten additional inserts
- Dust hood

TECHNICAL SPECIFICATIONS
Motor Horsepower: 15 HP
Working Width: 630mm (24 3/4”)
Working Height: 3.5 – 300mm (1/8” – 11 3/4”)
Max. Depth of Cut: 8mm (5/16")
Minimum Length of Stock: 260mm (10 1/4”)
Cutter Head Diameter: 120mm (4 3/4")
Cutterblock Type: Xylent - Helicoidal
Cutterblock Speed: 4500 rpm
Table Size: 640mm x 1000mm (25 3/16” x 39.4”)
Feed Speeds: 4 - 20 m/min (16 – 62 FPM)
Infeed Roller: Sectional Steel, power driven
Outfeed Roller: Rubber, power driven
Dust Hood Diameter: 150mm
Electrical Requirements: 230 volt
Dust Extraction: 980 cfm

L'INVINCIBILE BRAND VIDEO

Powered by Top Rated Local®