Voorwood

The A11 Table Shaper Sander shapes all components of cabinet doors, parts of drawers, and other wooden components and simultaneously sands the desi...

The A115 Shaper Sander can accommodate four shaping/sanding stations. Clockwise and counter-clockwise rotations are used on specific shapers to eli...

The A117 Shaper Sander can accommodate five or more shaping/sanding stations. Clockwise and counter-clockwise rotations are used on specific shaper...

The A12 Miter Lock Shaper shapes the edge of solid wood and plywood parts in one pass to produce a precision lock miter joint. Eliminates the dowel...

The A15 Stile and Rail Shaper straight cuts inside edges on the stiles, rails, and the outside edges (long-grain). This is the only machine on the ...

The A15 Stile and Rail Shaper straight cuts inside edges on the stiles, rails, and the outside edges (long-grain). This is the only machine on the...

The A1515 Single-End Tenoner can accommodate four stations with identical HSK-63F spindle motors, to be used in any configuration of shaping and sa...

The A1517 Single-End Tenoner can accommodate five or more stations with identical HSK-63F spindle motors, to be used in any configuration of shapin...

The A16 Cope Shaper with single side dual spindle is designed to shape single or multiple parts in one pass. The cope shaper has an average cycle t...

The A215 Double-End Tenoner profiles and sands both edges of hardwood parts in one continuous pass. Each side of the machine is comprised of two sh...

The A215 Double-Side Cope Shaper is equipped with mirrored shaping stations on either side. The first station has the option to be configured to ju...

The A217 Double-End Tenoner profiles and sands both edges of hardwood parts in one continuous pass. Depending on model configuration, each side of ...

The A2515 Double-End Tenoner automatically makes all necessary adjustments for each profile setup. All spindles are set up to rotate with or agains...

The A2515 Double-Side Cope Shaper is equipped with mirrored shaping stations on either side that automatically position all necessary adjustments f...

The A2517 Double-End Tenoner is fully equipped to automatically position all necessary adjustments for each profile setup. All spindles are of the ...

The A26 Cope Shaper is designed to shape single or multiple parts in one pass. Each shaping station is equipped with a precision-balanced drive mot...

The A515 Single-End Tenoner can accommodate four shaping/sanding stations. Clockwise and counter-clockwise rotations are used on specific shapers t...

The A517 Single-End Tenoner can accommodate five or more shaping/sanding stations. Clockwise and counter-clockwise rotations are used on specific s...

The Voorwood A5615 Automatic Double-Side Cope & Stick Shaper will process stiles and rails without operator input. RAIL PROCESSING: Substrates...

The Automatic Hopper Feed increases the production of the Voorwood line of profile laminators. 12′ infeed table with 8 rollers 34.50″ belt hei...

The HML-12 Profile Laminator applies hot melt adhesives to the back of the various paper, foil, or vinyl webbings, and wraps the webbing around all...

The HML-6 Profile Laminator applies hot melt adhesives to the back of various paper, foil, or vinyl webbing, and wraps the webbing around all types...

The HML-8 Profile Laminator applies hot melt adhesives to the back of various paper, foil, or vinyl webbing, and wraps the webbing around all types...

The L115 Edge Foiler shape the profile, sand it smooth and apply the dry-transfer finish foil on MDF consecutively in one continuous process. Stock...

The L117 Edge Foiler shapes the profile, sands it smooth and applies the dry-transfer finish foil on MDF in a single continuous process. Stock is t...

The L217 Double-End Foiler profiles, sands, and applies dry-transfer finishing foil to both edges of MDF parts in one continuous pass. Designed for...

The L73 Contour Foiler applies transfer-finishing foil to the non-linear, pre-shaped, and sanded edge of your MDF part without any template. The fe...

The L79 End Finisher is designed to precisely cut MDF louver parts to length, then sand both ends. Next, to complete the one-pass process, an appli...

The L80 Surface Foiler is a high-speed heat transfer foil laminator. The hot-stamp surface foiler applies dry-transfer finishing foils to the surfa...

The L85 Surface Foiler uses dry-transfer finish technology applying a transfer finish on panels up to two feet in width. You can finish doors, cabi...

The L86 Surface Foiler will apply a variety of transfer foil finishes to MDF and other substrate panel faces up to 36 inches wide. The substrate is...

The LUR27 Converter Laminator (Film to Film Laminator) applies transfer-finishing foils to the surface of PVC. Hot-stamp foils have the look of rea...

The M25 Miter Machine is configured with a router spindle station for mortise cuts and a spindle station for tenon cuts. Each station has separate ...

The P78 Plough Foiler cuts a single plough (bluff cut) to the desired profile in an MDF drawer front or similar component and then sands and applie...

The WL12 Profile Wrapper (L-12 Profile Laminator) for Paper, Vinyl and Low Pressure Laminates. This compact laminator produces high quality mouldin...

The WL4 Profile Wrapper (L-4X Profile Laminator) is for applying paper, vinyl, and low-pressure laminates upon substrates. This compact laminator p...