Cantek | GT400brd 16″ Double Surface Planer

by Cantek
$0.00
SKU WSI-CantekGT400BRD

Plane your material efficiently in a single pass.

The Cantek GT400BRD 16″ Double Surface Planer has a robust cast-iron body for industrial planing day in and day out.  The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal.  The material is passed over the bottom head with a spring-loaded pin feed system allowing it to act like a jointer to flatten the board prior to being planed to an accurate thickness with the top head.

  • Spring loaded conveyor pin system ensures material is passed over the bottom cutterhead to resulting in a flat and uniform board prior to planing to thickness on the top head
  • Spiral insert knife cutterheads with two-sided solid carbide knives produce a smooth finish with increased stock removal capacity and extremely quiet operation
  • Heavy-duty cast-iron machine body and table for vibration free cutting
  • Digital electronic thickness adjustment in INCH and MM (Inch = 0.001” / mm = 0.01mm resolution) for precise thickness control
  • 16″ wide x 6.7″ thick planing capacity
  • Cutterheads are spiral insert type with six (6) rows of carbide inserts
  • (2) driven and (1) idle bed roll for superior feeding of even difficult material
  • Swiveling control panel for more ergonomic access to machine controls
  • Inverter variable speed control with feed speeds from 26 to 80 FPM
  • Easy to access external handwheel adjustment of infeed bed
  • Hard chromed worktable for high wear resistance
  • Auto lubrication to conveyor chain, central lubrication for dovetail elevation guideways
  • Section chipbreaker and sectional feed roller before top cutterhead
  • Rubber outfeed top roller to prevent chip marking
  • Over thickness safety shut-off bar across infeed.
  • Ammeter for each motor on control panel to monitor motor load
Maximum working width
16″
405mm
Maximum working thickness
6.7″
170mm
Minimum workpiece length
10″
250mm
Minimum working thickness
0.315″
8mm
Bottom jointing head motor
10 HP
Top planing head motor
15 HP
Feed motor
2 HP
Table elevation motor
½ HP
Cutterhead diameter
4″
101mm
Knife information
30mmx12mmx1.5mm
60 knives / head
Cutterhead speed
5000 RPM
Feed speed (variable)
23~65 FPM
8~24 m/min
Dust collection
2 @ 5″ diameter
2 @ 125mm
Table size
19″ x 86″
482x2185mm
Machine dimensions (LxWxH)
86.6″ x 35.43″ x 66.93″
2200x900x1700mm
Net weight
4180 Lbs.
1900 kgs
Packaging dimensions
90.5″ x 37.4″ x 72.83″
2350x1060x1940mm
Gross weight
4620 Lbs.
2100 kgs
Powered by Top Rated Local®