Cantek | GT610hi Cardan Shaft Drive Double Surface Planer

by Cantek
$66,010.00
SKU WSI-CantekGT610HI

High efficiency and high-speed double surface planing.

The Cantek GT610HI Cardan Shaft Drive Double Surface Planer is capable of speeds up to 98 feet per minute and its robust cast-iron body & industrial cardan drive system ensure high production planing day in and day out.  The large diameter cutterheads are spiral type with two-sided solid carbide inserts which produce a clean finish with superior stock removal capacity. The spring loaded feed system passes the material over the bottom head allowing it to act like a jointer to flatten the board prior and then a sectional infeed roller feeds the material through the top head for accurate dimensioning.

  • Powerful 40HP top head motor and 30HP bottom head motor for maximum stock removal
  • Full cardan shaft feed system allowing for faster feed speeds up to 98 FPM
  • Planing capacity up to 24” wide and 8” thick
  • Pin type carpet feed system passes the material over the bottom head to ensure a flat surface
  • (7) bed rollers including (3) driven rolls for superior feed speeds
  • Spiral insert knife cutterheads with 6 rows of two-sided 30x12x2.5mm solid carbide insert knives provide superior stock removal, reduced machine load and noise, and optimum finish quality
  • Cast iron machine frame for superior vibration damping resulting in a long machine & bearing life
  • Chrome-plated tables and top and bottom for maximum wear resistance
  • Cutterheads are mounted in precision ABEC 7 RHP bearings
  • Feed system uses a spring-loaded pin arrangement to pass material over the bottom jointing head.
  • Sectional serrated infeed roll before the top cutterhead
  • Variable feed speed by frequency inverter (VFD) with digital display for the feed speed
  • Digital thickness control for quickly and precisely setting the desired thickness
  • Upper assembly is adjusted for desired thickness by four large diameter cylindrical posts
  • Adjustable infeed bed by easily accessible handwheel to set desired stock removal on the bottom head
  • Easy to access swivel control panel with individual ammeters for load monitoring and hour meter to aid in maintenance planning
  • Cutterhead starters are Y-Delta providing soft start to the heads for reduced power consumption on startup
  • Automatic lubrication to the conveyor feed system
  • High quality Schneider electrical components to CSA/UL standard
 
INCH
METRIC
Max. working width
24”
610mm
Max. working thickness
8”
200mm
Min. working thickness
5/16″
8mm
Min. working length
12”
300mm
Cutterhead RPM
5000 RPM
Cutterhead diameter
5.3”
135mm
Feed speed
30-98 FPM
10 – 30 m/min
Top cutterhead motor
40 HP
Bottom cutterhead motor
30 HP
Feed motor
5 HP
Table Rolls
7 (3) driven
Opening hoist motor
1 HP
Machine weight
8800 lbs
4000 kgs
Machine dimensions (LxWxH)
112” x 67” x 67”
2830x1700x1700mm
Shipping weight
9240 lbs
4200 kgs
Shipping dimensions (LxWxH)
115” x 75” x 75”
2900x1900x1900mm

Powered by Top Rated Local®