- Connect a limitless number of guide rails for long cuts with Festool Guide Rail Connectors
- Steel bars with 4 set screws secure connectors, ensuring straight cuts
- Set screws are slotted to prevent over-tightening the rail
- Can also be used to connect Festool MFS templates
Quick Tip! To maintain a perfectly straight connection between two guide rails be sure to leave a business card sized gap between the two rails you intend to connect. Once the guide rail connectors (qty 2) are in the t-slots between the two rails and bridging the small gap, grab a Festool Plunge Cut Track Saw. Lay the saw on one of the rails and slide it over the gap between the rails. Once the base of the saw (which is perfectly true) is over the gap, tighten the two green cam locks. Once the locks are tightened your two rails are now connected in a straight line. Tighten the set screws on the guide rail connectors.
From the Manufacturer
Connect any number of guide rails for accurate, limitless cutting with Festool guide rail connectors. Connectors fit in integrated guide rail T-slots for secure cutting. Includes 1 connector (2 are needed). Can also be used to connect the Festool MFS templates.
Steel bars with 4 set screws secure connectors, ensuring straight cuts