Surfacing-thicknessing planer

Surfacing-thicknessing machine for the demanding craftsmen and carpentries, for a high-flexible production with an “elite” finishing.

Discover the "Xylent" cutterhead, available for this machine.

Perfect finishing 
The planer unit stands on cast iron supports and the standard version has a 87 mm diameter cutter block with 3 knives. (The optional “Tersa” cutter block is available with 4 quick tightening knives and automatic adjustment). For an impeccable finish, the pressureof the thicknesser feed rollers can be adjusted according to the type of wood machined. The infeed roller has a helicoidal profile to guarantee firm and constant work piece feed, while the outfeed roller, in sandblasted steel, maintains the perfect post-processing finishing.

Planing fence
The fs 41e uses a dedicated planing fence extremely rigid and smooth, thanks to a support with central round bar.

“Xylent” spiralknife cutter block with 3 series of knives 
The 3 spiralknives give an exceptional finish. Reduced noise during machining provides a more comfortable working environment. It also improves the dust extraction due to the production of very small chips. Each cutter has 4 tips which can be rotated into the cutting position when worn. Therefore increasing the production life of the cutter block before knives require replacement.

fs 41e    
Cutterhead working width mm / inches 410 / 16
With TERSA Straight-knife Cutterhead:
Cutterblock diameter / no° of standard knives
Dimension of standard knives

mm / n°
mm

87 / 3
410 x 30 x 3
With XYLENT Spiral helical Cutterhead:
Cutterblock diameter / no° of standard knives
Dimension of standard knives

mm / n°
mm

87 / 66
15 x 15 x 2.5
Max. stock removal mm 5
Jointer table length mm / inches 2200 / 79
Planer table dimensions mm / inches 423 x 775 / 16.65 x 30.5
Planer feed speeds m/min 6 / 12
Min. - max. planer working height mm / inches 3 - 230 / 0.12 - 9
Single-phase motor Hp 4.8
Fence Tilt degrees 0 - 45

Powered by Top Rated Local®