Click or scroll to zoom
Tap or pinch to zoom
- Cast iron table and base provide strength and reduce vibration during use
- Four precision-ground column design feature adds stability when raising and lowering the table
- Three cutter head design produces a superior finish in either application
- Two speed gear box has feed rates set for optimum planing and molding results
- Molding cutter head accommodates over 40 standard molding cutter sets; most 2 or smaller heads can be installed without removing the planning knives to save you set-up time
- Infeed and outfeed rollers are adjustable and rubber-coated to support your workpiece without marring the wood
- Top-mounted height adjustment handle is easy to use for quick table height changes
- Totally enclosed fan-cooled 1-1/2HP motor uses two matched V-belts to deliver smooth, consistent power to the cutter head
- Exclusive angled 4 dust port keeps the dust hose out of the way while providing efficient chip and dust removal
- Built-in lockable casters add support and stability to machine while in use
| Height | 0.000 |
| Length | 0.000 |
| Gross Weight | 258.000 |
| Net Weight | 258.000 |
| Volume | 14.236 |
| Width | 0.000 |
| Ready For Web (US) | Yes |
| Prop 65 | Cancer and Reproductive Harm |
| Maximum Depth of Cut - Molding (In.) | |
| Prewired Voltage (V.) | 115 |
| Cutterhead Diameter (In.) | 2-9/16 |
| Standard Knife Size (L x W x T) (In.) | |
| Dust Port Outside Diameter (In.) | 4 |
| Motor Phase (PH) | 1 |
| Number of Knives | 3 |
| Table Size with Extensions (L x W) (In.) | |
| Motor Voltage (V.) | 115/230 |
| Cutterhead Speed (RPM) | 4500 |
| Style (Type) | Planer/Molder |
| Motor Amps | 15/7.5 |
| Recommended Circuit Size (Amps.) | |
| Motor Power (HP) | 1-1/2 |
| Cuts Per Minute | 13500 |
| Maximum Depth of Cut - Planing (In.) | |
| Minimum Planing Length (In.) | 14 |
| Maximum Planing Width (In.) | 13 |
| Feed Rate - Planing (FPM) | 20 |
| Feed Rate - Molding (FPM) | 10 |
| Maximum Planing Thickness (In.) | 6-1/8 |
| Dust Collection Minimum CFM Required (CFM) | |
| Wiring Remarks |
