The Stolbek Cosmo SC is a turnkey robotic sanding cell designed to automate sanding operations for cabinet doors, drawer fronts, and wood panels. Equipped with a Yaskawa Motoman GP12 industrial robot, the Cosmo SC performs face sanding, edge sanding, and corner breaking within a single automated system.

The Cosmo SC accommodates a variety of door styles, including Shaker, raised panel, recessed panel, slab, and five-piece cabinet doors. It is capable of sanding flat and profiled surfaces, as well as solid wood, MDF, veneer, primer, sealer, and coated materials.

Operation is simplified through a swipe-to-start interface that eliminates the need for robot programming or barcode scanning. Operators can create, save, and recall sanding recipes to accommodate different materials, door styles, and finishing requirements.

Designed and manufactured in Ontario, Canada, the Cosmo SC provides cabinet manufacturers and woodworking shops with an automated sanding solution for reducing manual labor and increasing production efficiency.

 

  • Yaskawa Motoman GP12 industrial robotic arm

  • Automated face sanding, edge sanding, and corner breaking

  • Three sanding tools for multiple sanding applications

  • Sands flat, profiled, and multi-depth wood panels

  • Compatible with Shaker, slab, raised panel, recessed panel, five-piece, and mitered cabinet doors

  • Suitable for cabinet doors, drawer fronts, panels, and stair treads

  • Sands solid wood, hardwood, softwood, MDF, plywood, veneer, and composite materials

  • Capable of sanding primer, sealer, and painted or coated surfaces

  • Swipe-to-start operation without robot programming or barcode scanning

  • Saved sanding recipes for repeatable operations

  • Approximately 30-second changeover between saved recipes

  • Approximately 3-minute setup for new sanding recipes

  • Adjustable sanding processes for different materials and finishing requirements

  • QR-code access to operator video instructions

  • Designed for operation by a single operator

  • Manufacturer-reported production capacity of approximately 20–40 parts per hour, depending on application

  • Factory-direct technical support

  • Designed, engineered, and manufactured in Ontario, Canada

  • One-year manufacturer's warranty

 

Specification

Details

Manufacturer

Stolbek

Model

Cosmo SC

Machine Type

Robotic Sanding Cell

Robot Manufacturer

Yaskawa Motoman

Robot Model

GP12

Number of Sanding Tools

3

Orbital Disc Size

5"

Orbital Pad Size

3" x 4"

Corner Breaking Tool

2"

Abrasive Grit Range

100–400

Sanding Operations

Face Sanding, Edge Sanding, Corner Breaking

Supported Materials

Solid Wood, MDF, Plywood, Veneer, Composite Materials, Primer, Sealer, Painted and Coated Parts

Compatible Door Styles

Shaker, Slab, Raised Panel, Recessed Panel, Five-Piece, Mitered

Average Cycle Time

30 Seconds–3.5 Minutes

Typical Production Rate

20–40 Parts per Hour

Reported 8-Hour Shift Production

140–400 Doors/Parts

Typical Operators Required

1

Saved Recipe Changeover

Approximately 30 Seconds

New Recipe Setup

Approximately 3 Minutes

Programming Requirements

No Robot Coding Required

Country of Manufacture

Canada

Warranty

1 Year

Typical Sanding Cycle Times

Operation

Typical Cycle Time

MDF Center Panel

Under 1 Minute per Side

Solid Wood Rails

Approximately 1 Minute per Side

Edge Sanding and Corner Breaking

Adds Approximately 1 Minute

Primed Rails and Center Panel

Approximately 1.25 Minutes per Side

Fully Sanded Primed Door

Approximately 3 Minutes

Production rates and cycle times are manufacturer-reported estimates and vary according to part dimensions, material, surface profile, and selected sanding operations.

Source: Stolbek manufacturer's Cosmo SC product information.

 

Powered by Top Rated Local®