A silicone-free lubricant for woodworking machines equipped with an automatic feed or manual bed lubrication systems. WAXILIT 22-74 is recommended for particularly resinous wood. WAXILIT guarantees, a good lubricating effect, good sliding effect, outstanding corrosion protection with no left behind residue and helps prevent blockages of pumps, lines or nozzles.
Classified as non Hazardous/Hazmat for DOT Shipping makes this product much more affordable to ship!
WAXILIT is the original machine table lubricant and is considered the industry standard by which all table lubricants are compared to.
WAXILIT 22-74 Features:
- Provides excellent non-sticking table lubrication
- Will not contaminate pumps, lines or nozzles
- Classified non-hazardous for shipping purposes
- Will not stain the wood or leave greasy residue
- Will not adversely affect paints and stains
- Does not interfere with any post-treatments
- Prevents formation of rust
- Biodegradeable in accordance with OECD* 301F
NON Hazardous/Hazmat for DOT Shipping
Available Container Sizes: 1 (Qty 12 - Sold by Case) | 20 | 40 | 160 kgs
TECHNICAL DATA SHEET:
No substances regarded as toxic or carcinogenic according to the Regulations concerning Dangerous Substances are used in the production of WAXILIT 22-74.
After classification of the substance specific parameters WAXILIT 22-74 is easily biodegradeable to over 70%. This evaluation is done according to method OECD* 301F. This is the best value a chemico-technical product can achieve.
WAXILIT 22-74 is a silicon-free lubricant for woodworking machines with an automatic feeder. This lubricant also ensure a good lubricant effect. No blockage of pumps, pipes or nozzles.
Pour WAXILIT 22-74 into the storage tank of the lubricant pump. The lubricant can also be used with a hand spray-gun (preferably metal).
Meter the lubricant quantity according to the type of wood; Soft Woods = Less Lubricant, Hard Woods = More Lubricant.
WAXILIT 22-74 does not leave spots. There have been no reports of trouble during subsequent staining, varnishing or gluing.
Check out WAXILIT 22-60 for use with wet wood, new wood and coarse wood.
Range of application:
Solution of active ingredients in mineral oil
Physical and chemical properties:
Appearance: Light Yellow
Density at 20°C: 0.81 g/ml ; DIN 51757
Active substances: 20,00
Flashpoint: > 60°C
Viscosity at 20°C: 11 sec ; Flow cup 4mm, DIN EN ISO 2431
Storage temperature: between 10°C and 30°C
Maximum storage: approx. 18 months
Stir up before use. Do not store outdoors. Protect from heat and cold. Allow products to reach room temperature before use.